Getting to Know the SF90
HIGH VOLTAGE PLUG IN HYBRID
The Ferrari SF90 is a high voltage plug in electric. When servicing this hybrid model, it’s important to be aware of high voltage components cable routing.
If the vehicles high voltage system is in a low power situation, the high voltage system will need to be charged with the factory battery tender.
If there is not a high voltage charge option, the vehicle will need to be transported to a location to charge the high voltage system.
JUMP START WARNING
The 12 volt battery does NOT power the start of the vehicle. This battery only operates the auxiliary components on the vehicle. The vehicle must have 5% high voltage power to initiate the start of the vehicle.
TOOL KIT
The tool kit for the SF90 is in the front trunk. There are 3 options to release the front trunk latch:
1.
Press button on driver door panel.
2.
Press Key fob 2 times within 5 seconds.
3.
Pull loop under dashboard in a no power situation.
HOOD CLOSURE
To properly close the hood, set it down and then press in the center.
